Explorations of Post Constrained Recovery Residual Stress of Shape Memory Alloys in Self-healing Applications

Auteurs-es

  • Muhammad Istiaque Haider Muhammad Istiaque Haider Advanced Structures Laboratory Mechanical Engineering Department University of Wisconsin Milwaukee 3200 North Cramer Street Milwaukee, WI 53211 https://orcid.org/0000-0003-0391-7626
  • Maysam Rezaee Advanced Structures Laboratory Mechanical Engineering Department University of Wisconsin Milwaukee 3200 North Cramer Street Milwaukee, WI 53211 https://orcid.org/0000-0002-3653-4114
  • Nathan Salowitz Associate Professor of Mechanical Engineering Adjunct Professor of Electrical Engineering Adjunct Professor of Civil Engineering Associate Editor of Structural Health Monitoring Wisconsin Space Grant Consortium Advisory Council Member University of Wisconsin - Milwaukee 3200 North Cramer Street #955 Milwaukee, WI 53211 https://orcid.org/0000-0001-8294-4483

DOI :

https://doi.org/10.17307/wsc.v1i1.341

Mots-clés :

shape memory alloy, self-healing materials, NiTi, constrained recovery, post constrained recovery residual stress (PCRRS)

Résumé

Self-healing materials with intrinsic capabilities of geometric restoration and damage recovery have a tremendous potential to improve product safety and reliability, especially in space applications where recovery or manual performance of repairs may be prohibitive, dangerous, or impossible.  Self-healing materials typically incorporate a complex internal structure containing constituent materials of different functionality and one of the primary methods is to reinforce self-healing materials with shape memory alloys that can be activated to restore geometry and close a fracture.  Recent experimental investigation revealed that Nickel Titanium (NiTi) shape memory alloys (SMAs) could repeatedly produce stable residual stresses following constrained recovery when held in a constrained condition during temperature change through the forward and reverse transformations.  The ability to produce this post constrained recovery residual stress (PCRRS) in a low temperature state, without continuous actuation, and to regenerate it repeatedly have the potential to advance self-healing capabilities and even damage prevention.

Bibliographies de l'auteur-e

Muhammad Istiaque Haider, Muhammad Istiaque Haider Advanced Structures Laboratory Mechanical Engineering Department University of Wisconsin Milwaukee 3200 North Cramer Street Milwaukee, WI 53211

Teaching Assistant, Mechanical Engineering Department, University of Wisconsin Milwaukee

Nathan Salowitz, Associate Professor of Mechanical Engineering Adjunct Professor of Electrical Engineering Adjunct Professor of Civil Engineering Associate Editor of Structural Health Monitoring Wisconsin Space Grant Consortium Advisory Council Member University of Wisconsin - Milwaukee 3200 North Cramer Street #955 Milwaukee, WI 53211

Associate Professor of Mechanical Engineering
Adjunct Professor of Electrical Engineering
Adjunct Professor of Civil Engineering
Associate Editor of Structural Health Monitoring
Wisconsin Space Grant Consortium Advisory Council Member
University of Wisconsin - Milwaukee

Références

Aïssa, B., Therriault, D., Haddad, E., & Jamroz, W. (2012). Self-Healing Materials Systems: Overview of Major Approaches and Recent Developed Technologies. Advances in Materials Science and Engineering, 2012. doi:https://doi.org/10.1155/2012/854203

Alaneme, K., & Omosule, O. (2015). Experimental Studies of Self Healing Behaviour of Under-Aged Al-Mg-Si Alloys and 60Sn-40Pb Alloy Reinforced Aluminium Metal-Metal Composites. Journal of Minerals and Materials Characterization and Engineering, 3(1), 1-8. doi:10.4236/jmmce.2015.31001

Blaiszik, B., Kramer, S., Olugebefola, S., Moore, J., Sottos, N., & White, S. (2010). Self-Healing Polymers and Composites. Annual Review of Materials Research, 40(1), 179-211. doi:10.1146/annurev-matsci-070909-104532

Burton, D., Gao, X., & Brinson, L. (2006). Finite element simulation of a self-healing shape memory alloy composite. Mechanics of Materials, 38(5-6), 525-537. doi:https://doi.org/10.1016/j.mechmat.2005.05.021

Chen, X., Hehr, A., Dapino, M., & Anderson, P. (2015). Deformation Mechanisms in NiTi-Al Composites Fabricated by Ultrasonic Additive Manufacturing. Shape Memory and Superelasticity, 1, 294–309. doi:https://doi.org/10.1007/s40830-015-0032-1

Coughlin, J., Williams, J., & Chawla, N. (2009). Mechanical behavior of NiTi shape memory alloy fiber reinforced Sn matrix "smart" composites. Journal of Materials Science, 44(3), 700-707. doi:https://doi.org/10.1007/s10853-008-3188-7

Coughlin, J., Williams, J., Crawford, G., & Chawla, N. (2009). Interfacial Reactions in Model NiTi Shape Memory Alloy Fiber-Reinforced Sn Matrix “Smart” Composites. Metallurgical and Materials Transactions A, 40, 176–184. doi:https://doi.org/10.1007/s11661-008-9676-1

Das, R., Melchior, C., & Karumbaiah, K. (2016). Self-healing composites for aerospace applications. In S. Rana, & R. Fangueiro, Advanced Composite Materials for Aerospace Engineering: Processing, Properties and Applications (pp. 333-364). Woodhead Publishing. doi:https://doi.org/10.1016/B978-0-08-100037-3.00011-0

Dutta, I., Majumdar, B., Pan, D., Horton, W., Wright, W., & Wang, Z. (2004). Development of a novel adaptive lead-free solder containing reinforcements displaying the shape-memory effect. Journal of Electronic Materials, 33, 258–270. doi:https://doi.org/10.1007/s11664-004-0131-9

Dutta, I., Pan, D., Ma, S., Majumdar, B., & Harris, S. (2006). Role of shape-memory alloy reinforcements on strain evolution in lead-free solder joints. Journal of Electronic Materials, 35, 1902–1913. doi:https://doi.org/10.1007/s11664-006-0174-1

Farahi, B., Esfahani, M., & Sabzi, J. (2020). Experimental Investigation on the Behavior of Reinforced Concrete Beams Retrofitted with NSM-SMA/FRP. Amirkabir Journal of Civil Engineering, 51(4), 133-136. doi:10.22060/ceej.2016.689

Ferguson, J., Schultz, B., & Rohatgi, P. (2014). Self-Healing Metals and Metal Matrix Composites. The Journal of The Minerals, Metals & Materials Society, 66, pages866–871. doi:https://doi.org/10.1007/s11837-014-0912-4

Haider, M., Correa, A., Moghadam, A., Yan, X., & Salowitz, N. (2018). Experimental Exploration Of Post Constrained Recovery Mechanics Of NiTi. Proceedings of the ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, (p. V002T02A012). San Antonio, Texas. doi:https://doi.org/10.1115/SMASIS2018-8168

Haider, M., Rezaee, M., Yazdi, A., & Salowitz, N. (2019). Investigation into post constrained recovery properties of nickel titanium shape memory alloys. Smart Materials and Structures, 28(10), 105044. doi:https://doi.org/10.1088/1361-665X/ab3ad4

Haider, M., Yazdi, A., Rezaee, M., Tsai, L., & Salowitz, N. (2019). Mechanics of Post Constrained Recovery Residual Stress Produced by NiTi. Proceedings of the ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, (p. V001T02A007). Louisville, Kentucky. doi:https://doi.org/10.1115/SMASIS2019-5619

Hassan, M., Mehrpouya, M., Emamian, S., & Sheikholeslam, M. (2013). Review of Self-Healing Effect on Shape Memory Alloy (SMA) Structures. Advanced Materials Research, 701, 87-92. doi:https://doi.org/10.4028/www.scientific.net/AMR.701.87

Hayes, S., Jones, F., Marshiya, K., & Zhang, W. (2007). A self-healing thermosetting composite material. Composites Part A: Applied Science and Manufacturing, 38(4), 1116-1120. doi:10.1016/j.compositesa.2006.06.008

Jani, J., Leary, M., Subic, A., & Gibson, M. (2014). A review of shape memory alloy research, applications and opportunities. Materials & Design, 56, 1078-1113. doi:https://doi.org/10.1016/j.matdes.2013.11.084

Kapgan, M., & Melton, K. (1990). Shape memory alloy tube and pipe couplings. In T. Duerig, K. Melton, D. Stockel, & C. Wayman, Engineering Aspects of Shape Memory Alloys (pp. 137-148). London: Butterworth-Heinemann.

Kilicli, V., Yan, X., Salowitz, N., & Rohatgi, P. (2018). Recent Advancements in Self-Healing Metallic Materials and Self-Healing Metal Matrix Composites. The Journal of The Minerals, Metals & Materials Society, 70, 846–854. doi:https://doi.org/10.1007/s11837-018-2835-y

Lagoudas, D. (2008). Shape Memory Alloys: Modeling and Engineering Applications. Springer US.

Lau, K.-t. (2002). Vibration characteristics of SMA composite beams with different boundary conditions. Materials and Design, 23(8), 741–749. doi:https://doi.org/10.1016/S0261-3069(02)00069-9

Li, D., Zhang, X., Xiong, Z., & Mai, Y.-W. (2010). Lightweight NiTi shape memory alloy based composites with high damping capacity and high strength. Journal of Alloys and Compounds, 190(1-2), L15-L19. doi:https://doi.org/10.1016/j.jallcom.2009.10.025

Manuel, M. (2007). Design of a Biomimetic Self-Healing Alloy Composite. Evanston, Illinois: PhD Thesis - Northwestern University.

Manuel, M. V., & Olson, G. B. (2007). Biomimetic Self-Healing Metals. Proceedings of the 1st Intl. Conference on Self-Healing Materials. Noordwijk aan Zee.

Misra, S. (2013). Shape Memory Alloy Reinforced Self-healing Metal Matrix Composites. Milwaukee, Wisconsin: Master's Thesis-University of Wisconsin–Milwaukee. Retrieved from https://dc.uwm.edu/etd/731/

Ruzek, A. (2009). Synthesis and characterization of metallic systems with potential for self-healing. Milwaukee, Wisconsin: Master's Thesis- University of Wisconsin-Milwaukee.

Salowitz, N., Correa, A., Santebennur, T., Moghadam, A., Yan, X., & Rohatgi, P. (2018). Mechanics of nickel–titanium shape memory alloys undergoing partially constrained recovery for self-healing materials. Journal of Intelligent Material Systems and Structures, 29(15), 3025-3036. doi:https://doi.org/10.1177/1045389X18781260

Song, G., Kelly, B., & Agrawal, B. (2000). Active position control of a shape memory alloy wire actuated composite beam. Smart Materials and Structures, 9(5), 711. doi:https://doi.org/10.1088/0964-1726/9/5/316

Trask, R., Williams, H., & Bond, I. (2007). Self-healing polymer composites: mimicking nature to enhance performance. Bioinspiration & Biomimetics, 2(1). doi:https://doi.org/10.1088/1748-3182/2/1/P01

Wang, Z., Dutta, I., & Majumdar, B. (2006). Thermomechanical response of a lead-free solder reinforced with a shape memory alloy. Scripta Materialia, 54(4), 627-632. doi:https://doi.org/10.1016/j.scriptamat.2005.10.037

White, S., Sottos, N., Geubelle, P., Moore, J., Kessler, M., Sriram, S., . . . Viswanathan, S. (2001). Autonomic healing of polymer composites. Nature, 409, 794–797. doi:https://doi.org/10.1038/35057232

Yamauchi, K., Ohkata, I., Tsuchiya, K., & Miyazaki, S. (2011). Shape Memory and Superelastic Alloys: Applications and Technologies. Woodhead Publishing.

Téléchargements

Publié-e

2022-02-25

Comment citer

Haider, M. I., Rezaee, M., & Salowitz, N. (2022). Explorations of Post Constrained Recovery Residual Stress of Shape Memory Alloys in Self-healing Applications. Proceedings of the Wisconsin Space Conference, 1(1). https://doi.org/10.17307/wsc.v1i1.341

Numéro

2021: Advancing Aerospace with Artificial Intelligence

Rubrique

Physics and Engineering

Licence

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.