Electroplating of Copper-Based Alloys for the Catalytic Conversion of CO2
DOI:
https://doi.org/10.17307/wsc.v1i1.324Schlagworte:
electrocatalysis, CO2 conversion, electrochemistryAbstract
A variety of materials have been explored in the literature, but metals such as copper have been shown to uniquely generate appreciable amounts of hydrocarbon products during the electrocatalytic conversion of carbon dioxide (CO2). Furthermore, alloying copper with other metals such as tin has also been demonstrated to tune the selectivity towards more desirable products and minimize the parasitic hydrogen evolution reaction. Herein, we describe the use of pulsed current methods to successfully electrodeposit particles of copper-tin alloys on the surface of commercially available gas diffusion layer (GDL) substrates. Images obtained from an optical microscope were used to qualitatively assess the uniformity of the deposited particles. A scanning electron microscope (SEM) was used to qualitatively assess the size of these particles, which varied from micron-sized chunks to finer sub-micron particles. Additionally, x-ray diffraction (XRD) was used to identify the phase and composition of the alloys.Literaturhinweise
Chandrasekar, M. S., & Pushpavanam, M. (2008). Pulse and pulse reverse plating—Conceptual, advantages and applications. Electrochimica Acta, 53(8), 3313-3322. doi: http://dx.doi.org/10.1016/j.electacta.2007.11.054
Hori, Y., Murata, A., & Takahashi, R. (1989). Formation of hydrocarbons in the electrochemical reduction of carbon dioxide at a copper electrode in aqueous solution. Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases, 85(8), 2309-2326. doi: 10.1039/F19898502309
Hori, Y., Wakebe, H., Tsukamoto, T., & Koga, O. (1994). Electrocatalytic process of CO selectivity in electrochemical reduction of CO2 at metal electrodes in aqueous media. Electrochimica Acta, 39(11–12), 1833-1839. doi: http://dx.doi.org/10.1016/0013-4686(94)85172-7
Katoh, A., Uchida, H., Shibata, M., & Watanabe, M. (1994). Design of Electrocatalyst for CO2 Reduction: V . Effect of the Microcrystalline Structures of Cu‐Sn and Cu‐Zn Alloys on the Electrocatalysis of Reduction. Journal of The Electrochemical Society, 141(8), 2054-2058. doi: 10.1149/1.2055059
Low, C. T. J., & Walsh, F. C. (2008). Electrodeposition of tin, copper and tin–copper alloys from a methanesulfonic acid electrolyte containing a perfluorinated cationic surfactant. Surface and Coatings Technology, 202(8), 1339-1349. doi: https://doi.org/10.1016/j.surfcoat.2007.06.032
Peterson, A. A., Abild-Pedersen, F., Studt, F., Rossmeisl, J., & Norskov, J. K. (2010). How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels. Energy & Environmental Science, 3(9), 1311-1315. doi: 10.1039/C0EE00071J
Sen, S., Brown, S. M., Leonard, M., & Brushett, F. R. (2019). Electroreduction of carbon dioxide to formate at high current densities using tin and tin oxide gas diffusion electrodes. Journal of Applied Electrochemistry, 49(9), 917-928. doi: 10.1007/s10800-019-01332-z
Sen, S., Liu, D., & Palmore, G. T. R. (2014). Electrochemical Reduction of CO2 at Copper Nanofoams. ACS Catalysis, 4(9), 3091-3095. doi: 10.1021/cs500522g
Sen, S., Skinn, B., Hall, T., Inman, M., Taylor, E. J., & Brushett, F. R. (2016). Pulsed Electrodeposition of Tin Electrocatalysts onto Gas Diffusion Layers for Carbon Dioxide Reduction to Formate. MRS Advances, 2(8), 451-458. doi: 10.1557/adv.2016.652
Yin, Z., Palmore, G. T. R., & Sun, S. (2019). Electrochemical Reduction of CO2 Catalyzed by Metal Nanocatalysts. Trends in Chemistry, 1(8), 739-750. doi: 10.1016/j.trechm.2019.05.004
Downloads
Veröffentlicht
Zitationsvorschlag
Ausgabe
Rubrik
Lizenz
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
